Razor Barbed Wire, Razor Concertina Wire Packing
For the razor mesh, we mainly supply two kind of packing: simple packing and carton packing.
- For simple packing, inside is water proof paper and outside is woven bags and then compression; sometimes we can load the container one coil by one coil and sometimes we can make the coils to big bundles and for loading easily. It is main for BTO-10, BTO-12, BTO-22, BTO-30 and CBT-25. Galvanized razor coils usually use this packing.
- For carton packing, razor mesh coils are loading into hard cartoon boxes, it is mainly application to CBT-65, CBT-60 (450 mm).
- Razor wire packing, inside is water proof paper and outside is woven bags and then loading into hard cartoon boxes.
Here list five types of razor packing as below:
- Hot dipped galvanized 60 cm flat wrap razor wire:
- Coil height: 60 cm.
- Coil length: 16 m.
- Barb type: BTO-10.
- Packing: in rolls, 6 coils in a big roll, wrapped with paper and then wrapped with woven bag.
- Inside wire: 2.50 mm (-0.00, +0.10 mm).
- Tensile strength: 160 kg/mm2 (min).
- Zinc plate: 120 gr/m2 (min) hot dipped galvanized steel wire.
- Outside sheet: 0.50 mm (-0.00, +0.10 mm), hot dipped galvanized.
- Hot dipped galvanized single coil razor mesh:
- Coil diameter: 100 cm.
- Coil weight: 16 kg.
- Barb type: BTO-10.
- Packing: wrapped with paper and then wrapped with woven bag.
- Inside wire: 2.50 mm (-0.00, +0.10 mm).
- Tensile strength: 160 kg/mm2 (min).
- Zinc plate: 120 gr/m2 (min) hot dipped galvanized steel wire.
- Outside sheet: 0.50 mm (-0.00, +0.10 mm) hot dipped galvanized, bright, shinny.
- Hot dipped galvanized 45 cm cross type razor wire.
- Inside wire: 2.50 mm (-0.00, +0.10 mm).
- Tensile strength: 160 kg/mm2 (min).
- Zinc plating: 120 g/m2(min) hot dipped galvanized steel wire.
- Outside sheet: 0.50 mm (-0.00, +0.10 mm) hot dipped galvanized.
- Coil diameter: 45 cm.
- Clips per coil: 3 tie clips.
- Coil weight: 7 kg.
- Number of loops: 56.
- Ideal opening: 6-7 m.
- Max. opening: 8.5-9.5 m.
- Barb type: BTO-10.
- Packing: wrapped with paper and then wrapped with woven bag.
- AISI 430 or 304 stainless steel single coil razor wire.
- Inside wire: 2.50 mm (-0.00, +0.10 mm).
- Tensile strength: 160 kg/mm2 (min).
- Zinc plate: 120 g/m2 (min) hot dipped galvanized steel wire.
- Outside sheet: 0.50 mm (-0.00, +0.10 mm) stainless steel AISI 430.
- Barb type: BTO-10.
- Coil diameter: 100 cm.
- Coil weight: 16 kg.
- Packing: wrapped with paper and then wrapped with woven bag.
- Additional information: only outside sheet will be stainless steel and inside wire will be hot dipped galvanized
- AISI 430 stainless steel 45 cm cross type razor coils.
- Inside wire: 2.50 mm (-0.00, +0.10 mm).
- Tensile strength: 160 kg/mm2 (min).
- Zinc plate: 120 g/m2 (min) hot dipped galvanized steel wire.
- Outside sheet: 0.50 mm (-0.00, +0.10 mm) stainless steel AISI 430.
- Barb type: BTO-10.
- Coil diameter: 45 cm.
- Coil weight: 7 kg.
- Clips per coil: 3 tie clips.
- Number of loops: 56.
- Ideal opening: 6-7 m.
- Max. opening: 8.5-9.5 m.
- Packing: wrapped with paper and then wrapped with woven bag.
-
Razor wire coils carton packing, with two coils on the same level
-
Razor mesh packing with into hard cartoon boxes
-
Inside is water proof paper and outside is woven bags and then compression.
-
Inside is water proof paper and outside is woven bags and then loading into hard cartoon boxes.
-
Razor coils was put into the car, preparing to be delivered.
-
Razor wire was to be delivered.